Home » Interior Design Ideas

Siding Cost 2026: What Re-Siding a House Really Costs

By Spacehome Editorial  ·  November 22, 2026
Disclosure: This post may contain affiliate links. If you purchase through these links, we may earn a commission at no extra cost to you. We only recommend products/services we genuinely believe in.

Siding cost is priced by the square foot of wall, not the square footage printed on your floor plan — a distinction that explains most of the sticker shock homeowners feel when the first quote arrives. A 2,000-square-foot two-story house can have 1,800 to 2,200 square feet of siding-covered wall, and installed prices run roughly $3 to $15 per square foot depending on material. That puts most full re-sides between $8,000 and $22,000, with an Angi national average near $11,590 and higher figures when fiber cement, complex architecture, or extensive tear-off enters the picture. Here is how the material prices, wall-area math, and hidden line items fit together in 2026.

Two-story house with newly installed light-colored siding and stone veneer
Photo: daryl_mitchell, CC BY-SA 2.0, via Wikimedia Commons

Siding Cost by Material in 2026

Installed prices include materials and labor for a straightforward re-side, before tear-off and trim adjustments:

  • Vinyl: $4 to $8 per square foot (some guides $3 to $12), about $6.50 average. The most popular choice — affordable, low-maintenance, never needs paint. Budget vinyl can crack in extreme cold and fade over time. Life: 20 to 40 years.
  • Insulated vinyl: $6 to $13, with better R-value and rigidity.
  • Fiber cement (James Hardie): $6 to $15, roughly $9 to $9.50 average. Fire- and rot-resistant, paintable, and the longest-lived common option at 50 years or more — but heavy, labor-intensive, and a professional job. A ColorPlus factory finish adds a premium.
  • Engineered wood (LP SmartSide): $5 to $12, a wood look without natural wood’s maintenance.
  • Natural wood / cedar: $6 to $18, with the widest spread by species and grade. Needs staining or sealing every few years.
  • Stucco: $7 to $12. Metal: $5 to $16. Stone veneer: $10 to $28 at the top of the market.

Using a typical 1,800 square feet of wall, that works out to about $7,200 to $14,400 for vinyl, $10,800 to $23,400 for fiber cement, $9,000 to $18,000 for engineered wood, and $14,400 to $27,000 for natural wood. At This Old House’s typical installed prices, fiber cement runs about $2.87 more per square foot than vinyl — roughly $5,700 more on a 2,000-square-foot house.

Wall Area, Not Floor Area

Start with the wall you are actually covering. Subtract windows and doors, add gables, and remember that a two-story home has far more wall than its floor plan suggests. A 2,000-square-foot house typically has about 1,800 to 2,200 square feet of siding-covered wall; 1,200 square feet of wall is a small home, and 2,500 is a large one.

Scale the material rate by that wall area: 1,200 square feet of vinyl runs $4,800 to $10,800; 1,800 square feet runs $7,200 to $14,400; 2,500 square feet runs $10,000 to $20,000. Multiple stories, many corners, heavy trim, and tight access all push toward the high end because staging and cutting take longer. Northeast metros run roughly 25 to 45 percent above Southern markets for carpenter labor.

The Average Depends on Who You Ask

Angi puts the average siding project at about $11,590, with a typical range of $5,559 to $17,728. Fixr’s average is $14,500 for a 2,000-square-foot home and a normal range of $8,500 to $20,000. This Old House reports a broader $8,000 to $30,000 with a $19,000 average, pricing the average vinyl job on a 2,000-square-foot home at about $12,252. Those are not contradictions — they are different mixes of materials and scope. Treat $8,000 to $22,000 as the planning band for a full re-side and investigate any quote outside it.

Labor, Tear-Off, and the Lines People Forget

Labor accounts for 30 to 65 percent of the total, highest with fiber cement. It runs about $1 to $4 per square foot or $40 to $75 an hour depending on region and trade. Old siding removal and disposal typically add $1,000 to $2,500, though some guides put tear-off at $0.70 to $2 per square foot and a full strip-out as high as $2,000 to $6,000 for a large or layered job. Soffit and fascia replacement runs $2,500 to $7,000 whole-house; a stone-veneer accent on 200 square feet runs $4,000 to $9,000.

Then there are the surprises: rot in the sheathing, missing house wrap, and damaged framing discovered once the old siding comes off. House wrap, flashing, and standard trim are usually included in installed rates; insulation upgrades, complex trim, and structural repairs are not. Keep a contingency of roughly 10 percent. The same envelope-budget logic applies to the other exterior projects in our roof repair cost and deck cost guides — access and hidden damage drive all three.

Which Material Is Actually Cheaper

Vinyl wins on day one and loses slowly: fading, warping repairs, and an earlier replacement can make budget vinyl more expensive than fiber cement over a 30-year window. Fiber cement costs more up front, lasts 30 to 50 years, and leads the market with roughly 88.5 percent cost recovered at resale in Remodeling’s 2025 figures. In wildfire zones or very cold climates, the fire resistance and dimensional stability can justify the premium outright. Natural wood is a design choice with a maintenance bill; cedar needs refinishing every few years.

Siding is also a visual project: new boards change how trim, windows, and paint read together. Our interior painting cost guide covers the inside finish work, and the window replacement cost guide explains why window flashing and trim are worth coordinating with a re-side rather than doing twice.

Siding Over or Tear-Off?

Some contractors offer to install new siding over the existing layer, which skips disposal and lowers the bid. It works only when the old siding is flat, dry, and firmly attached — and when local code allows a second layer. Vinyl over vinyl is the common case; fiber cement and wood almost always need a clean substrate. The drawback is that you cannot inspect or repair what is underneath, and a bulky double layer can look thick at windows and doors. If there is any sign of moisture damage, pay for the tear-off: forgoing it is how a $15,000 job turns into a $25,000 one two years later.

The Bottom Line

Budget $4 to $8 per square foot for vinyl, $6 to $15 for fiber cement, and $8 to $18 for wood, multiplied by actual wall area — usually 1,800 to 2,200 square feet on a 2,000-square-foot home. Expect $8,000 to $22,000 all-in, plus $1,000 to $2,500 for tear-off and a contingency for what the old siding was hiding. Get three itemized bids that separate material, labor, wrap, trim, and removal, then choose on a 30-year timeline rather than the sticker price alone.